Epson NX100 Guida di Avvio Rapido

Navigare online o scaricare Guida di Avvio Rapido per Apparecchi multifunzione Epson NX100. Epson NX100 Start Here Guide Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 8
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Epson Stylus
®
NX100 Series
Start Here
6 Release the scanner support and lower the scanner.
7 Press the Stop button to charge the ink. Charging takes about
2 minutes.
Caution: Don’t turn off the NX100 Series while it is charging or you’ll
waste ink.
Unpack
If anything is missing, contact Epson as described on the back.
Caution: Do not open the ink cartridge package until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.
Canada only: For French speakers, remove stickers from the backing sheet
and place over corresponding text on the control panel.
Remove all the tape.
1
Stop
3 Flip the feeder guard forward. Then squeeze the edge guide and
slide it left.
4 Load paper against the right edge and underneath the tab, then slide
the edge guide over.
Note: Don’t load the paper sideways.
5 Flip the feeder guard back.
4114365 Rev.0
1-F C
4114365 Rev.0
1-F M
4114365 Rev.0
1-F Y
4114365 Rev.0
1-F K
Turn on the NX100 Series
1 Connect the power cable.
Note: Do not connect to the computer at this time.
2 Press the On button.
Load paper
1 Open the paper support.
2 Open the output tray and pull out the extension.
4
2
11
4 6
Install cartridges
Note: Do not load paper yet.
1 Lift up the scanner and prop it up with the support.
2 Shake the ink cartridges, then unpack them.
3 Remove only the yellow tape from each cartridge.
Caution: Do not remove any other seals or the cartridge may leak.
4 Insert the cartridges in the holder for each color.
5 Press each cartridge down until it clicks.
3
(Included for Canada only)
Vedere la pagina 0
1 2 3 4 5 6 7 8

Sommario

Pagina 1 - Start Here

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Pagina 2

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Pagina 3

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Pagina 4

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Pagina 5 - Control panel

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Pagina 6

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Pagina 7

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Pagina 8

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Commenti su questo manuale

Nessun commento