Epson UB-E02 Specifiche Scaricare il pdf (Pagina 33)

Rev. A Utilities 3-9

UB-E02 Technical Reference Guide

CAUTION:

When you cannot check the MAC address on the label on the UB-E02 that is installed on

the printer, be sure to finish the TM Net WinConfig by clicking Close from the Device tab;

then turn off the printer and remove the UB-E02 to check it.

4. Double-click the TCP/IP tab.

5. You can acquire the IP address by Auto or Manual setting.

❏ Auto setting: Acquire the IP address, subnet mask, and default gate way from

DHCP server. A DHCP server is required.

Note:

Do not use the auto setting without a DHCP server. Refer to the manual of the server for setting.

❏ Manual setting: Assign the IP address, the Subnet mask, and the Default gateway.

Ask your administrator for the IP address and the Default gateway

to be set.

CAUTION:

Be sure that the Set by PING box is turned on if a setting by ping or arp command is

permitted.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

Nessun commento

Epson UB-E02 Specifiche Pagina 33