Epson Powerspan Manuale Utente Pagina 11

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 24
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 10
DIMM.AM335x (Rev3) 11/24
3 additional GPIO output signals are provided to control the power supply of the display and the
backlight.
Signal
Description
LCD_VEPWC
Optional display power control output, driven by GPIO1_29
LCD_VCPWC
Optional display power control output, driven by GPIO2_27
LCD_DON
Display power enable signal, driven by GPIO2_2
Signal is used to switch the backlight power (“0” backlight off; “1” backlight on)
3.9 Touch Interface
A 4-wire resistive touch screen controller is incorporated in the processor AM335x.
The 4 touch interface signals TOUCH_XP, TOUCH_XM, TOUCH_YP and TOUCH_YM are available at
the SODIMM connector.
3.10 Audio Interface
The serial interface MCASP1 of the processor AM335x is available as I2S audio interface at the
SODIMM connector to connect an external audio codec.
The interface can be operated in master or slave mode. Different clocks for receive and transmit are
possible.
3.11 CAN Controller
Two CAN interfaces are incorporated in the processor AM335x. Both interfaces support CAN
specification V2.0B with up to 1Maud transfer rate. The message RAMs can store 64 message
objects.
The receive line and the transmit line of the controller CAN0 are available at the specified pins of
the SODIMM connector. The signals have LVTTL level and an appropriate CAN transceiver must be
added externally.
The signal lines of the second CAN controller CAN1 are optionally available at the pins RTS and CTS
of UART3.
3.12 SDC/SDIO Interface
The processor AM335x incorporates 3 SDC/SDIO interfaces which are compatible to the SD Physical
Layer specification 3.0. All interfaces have 8 data lines and provide inputs for card detect and write
protect status.
The interface MMC0 is unavailable because of pin multiplexing.
The interface MMC1 is used onboard to connect the NAND flash. All 8 data lines are used for the
flash interface.
Vedere la pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commenti su questo manuale

Nessun commento