Epson C1440AXIS - Axis 1440 Print Server Manuale Utente Scaricare il pdf (Pagina 3)

AXIS 1440 Network Print Server for EPSON Printers

8/98 AXIS 1440 Print Server for EPSON Printers

- 3

Hardware Installation

1. Locate and write down the serial number on the bottom of

the AXIS 1440. You need this number during setup.

2. Turn the printer off and connect the AXIS 1440 to the

printer’s parallel port.

3. Connect the AXIS 1440 to the network using a twisted pair

(10BaseT) cable.

4. Turn the printer on and connect the external power supply

to the AXIS 1440. Check to make sure the network

indicator is flashing.

5. Press the test button to print a test page. If the text page

prints successfully, the AXIS 1440 is connected correctly to

the printer.

Using AXIS NetPilot to Install the Print

Server to the Network

1. After installing the software from the AXIS Utilities disks 1

and 2 to your server workstation, double-click the AXIS

NetPilot icon to start the setup program. Units that have

not been installed appear in the New Axis Units folder.

2. Select your AXIS 1440 Print Server from the New Axis

Units folder and click the Install button on the toolbar. The

Installation Wizard launches.

3. Follow the Installation Wizard to complete setup.

Setting Up Windows Workstations

When you set up workstations for peer-to-eer printing, the

appropriate Axis utility (either AXIS Print Monitor or AXIS

Print Utility for Windows) must be installed on

every

workstation

. For client-server printing, you only need to install

this utility on the

server workstation

To configure printer ports for Windows 95/98

1. Click

Start

, point to

Settings

, then click

Printers

2. Right-click your EPSON printer icon and click Properties.

3. Click the

Details

tab.

4. If your network supports NetBIOS/NetBEUI:

❏

Select the AXIS printer port from the ports list and click

. The port name appears as <name>.LP1, where

<name> is AX followed by the last six digits of the AXIS

1440 serial number (for example, AX560B35).

If your network supports TCP/IP (LPR):

a. Click

Add Port...

b. Click

Other

and select

AXIS Port

from the list. Click

c. Select your network protocol,

LPR (TCP/IP)

, and click

5. Click

Port Settings

. If you want error condition pop-up

messages to be displayed, check the

Show printer error

condition pop-up messages

box and specify the frequency

at which messages are redisplayed in the

Printer Error

Condition Pop-up Timeout

option. Click

to close the

dialog box.

6. Click

to save your settings.

To configure printer ports for Windows NT:

1. Click

Start

, point to

Settings

, then click

Printers

2. Right-click your EPSON printer icon and click

Properties

3. Click the

Ports

tab, then click

Add Port

4. Select AXIS Port from the list, then click

New Port...

5. Select your network protocol and click

6. If your network supports NetBIOS/NetBEUI:

❏

Select the AXIS printer port from the ports list and click

. The port name appears as <name>.LP1, where

<name> is AX followed by the last six digits of the AXIS

1440 serial number (for example, AX560B35). Click

If your network supports TCP/IP (LPR):

❏

Enter the IP address or host name for your print server,

then enter

LPT1

as the printer name. Click

, then

click

7. Click

Configaure Port...

If you want error condition pop-

up messages to be displayed, check the

Show printer error

condition pop-up messages box

and specify the frequency

at which messages will redisplay in the

Printer Error

Condition Pop-up Timeout

option. Click

to close the

dialog box.

8. Click

to save your settings.

1 2 3 4 5 6

Commenti su questo manuale

Nessun commento

Epson C1440AXIS - Axis 1440 Print Server Manuale Utente Pagina 3

Commenti su questo manuale

Prodotti e manuali riguardandi Stampa e scansione Epson C1440AXIS - Axis 1440 Print Server