Epson EPL-N2000 Guida Utente Scaricare il pdf (Pagina 31)

2-14 Configuring the EPL-N2000 for NetWare

6. Select a port number in the Configured Printers list and

press Enter.

7. Select the name of the EPL-N2000 on the Printer

Configuration menu. Then highlight the Printer Type and

select LPT1.

Note:

Although you can define the printer port as COM 2, it is

recommended that you define it as LPT1 to maintain compatibility.

8. Press Esc; then press Enter to save changes.

9. Select Queues Serviced by Printer from the Print Server

Configuration menu and assign a queue to the print server

port from the Available Queues list.

10. Press Esc to exit.

Configuring the Operating Mode and Making Other

Changes

After you define the EPL-N2000 on a NetWare print server, you

are ready to use EPSON Net! for NetWare to configure it to

operate as a remote printer. You can then make the following

changes:

❏ Change the port number to allow the EPL-N2000 to connect

to a different port on the NetWare print server.

❏ Enable or disable hunting, which allows the EPL-N2000 to

connect to the first available active port on the print server.

(This feature is useful if the NetWare print server has many

ports.)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 90 91

Nessun commento

Epson EPL-N2000 Guida Utente Pagina 31