Epson ESC Manuale Utente Scaricare il pdf (Pagina 33)

A-31

ESC N

Sets the skip-over perforation to n lines.

(IBM Proprinter XL24/XL24E, 2391+, EPSON ESC/P2)

ASCII Code ESC N

Hexadecimal Value 1B 4E n

Decimal Value 27 78 n

Range 1 <

n < 127 (EPSON mode)

1 <

n < 225 (IBM mode)

The skip-over perforation is the sum of top and bottom margins values at the selected

vertical spacing. The n parameter must be less than the current form length. The

skip-over is memorized as physical position on the page. It is cancelled by ESC O or

changing the form length. The skip-over value, when accepted, will set the top and

bottom margins according to the operator panel setting (see the User Manual):

If the top margin set via operator panel is greater than the skip-over value, then the

following value of the margins will be set:

Top margin = skip-over value

Bottom margin = 0

If the top margin set via operator panel is less or equal to the skip-over value, then

the following value of the margins will be set:

Top margin = operator panel value

Bottom margin = the difference between skip-over value and top margin value

If the sum of the top and bottom margins values set via operator panel is less than

the skip-over value, the following values for the margins will be set:

Top margin = operator panel value

Bottom margin = the difference between skip-over value and top margin value

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 287 288

Nessun commento

Epson ESC Manuale Utente Pagina 33