Epson 1680 Manuale Utente Scaricare il pdf (Pagina 145)

138

Installing the TCP/IP Protocol

3. Click the

Add

button. You see

the screen to the right.

4. Select

Protocol

from the list and

click the

Add

button. The

screen to the right appears.

5. Select

Microsoft

from the

Manufacturers list, and

TCP/IP

from the Network Protocols list.

Then click

6. Continue with the instructions

below to assign an IP address.

Assigning an IP Address for Windows 95 and

Windows 98 (First Release)

If your network is connected to the Internet, ask your Internet provider or IS

department for a formal IP address.

If your network is not connected to the Internet, you can use an IP address in the

following ranges: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.31.255.255, or

192.168.0.0 to 192.168.255.255. Use a different IP address for every computer on

your network.

If you use IP addresses in the ranges listed above, you may need to

change them before you connect the network to the Internet. Check with

your network administrator.

Windows 98 (Second Edition) automatically assigns an IP address to itself

(for the station it is installed on) if you are not connected to a DHCP server.

If your network uses a DHCP server, you don’t need to obtain an IP address before

beginning this procedure—the server finds one for you.

1680.book Page 138 Thursday, March 1, 2001 4:28 PM

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 158 159

Nessun commento

Epson 1680 Manuale Utente Pagina 145